Skip to content
TractorNuity
Log inSign up
TractorNuity Service Bulletin
TNB02600159Critical

DR Power PRO MAX30 walk-behind mower blades can run without the blade control engaged (CPSC 26-648)

DR Power · 2024–2025 · Published

CPSC recall 26-648 (August 6, 2026): on DR Power PRO MAX30 30 inch wide-cut walk-behind power lawn mowers, the blades can operate without the blade control system engaged, or continue to operate after the control is released. This violates the mandatory federal safety standard for walk-behind power lawn mowers and poses a serious laceration hazard. About 320 units in the US plus 9 in Canada; 19 incidents of blades staying engaged or failing to stop, no injuries. Remedy is a free repair kit, mailed to owners or installed by an authorized dealer.

Details

CPSC recall 26-648, announced August 6, 2026. About 320 units sold in the United States plus an additional 9 sold in Canada. The manufacturer reported 19 incidents involving the mower blades staying engaged or not stopping after release of the blade control; no injuries were reported at the time of the recall. Manufactured by Generac Power Systems of Waukesha, Wisconsin; distributed by DR Power Equipment of South Burlington, Vermont. HAZARD: The recalled mowers violate the mandatory safety standard for walk-behind power lawn mowers because the blades can operate without the blade control system engaged, or continue to operate even after the release of the control, posing a serious laceration hazard. AFFECTED: DR Power PRO MAX30 30 inch deck wide-cut walk-behind power lawn mowers, 10.6 FPT, in three variants, within the following serial ranges: ES, model WM25030DEN, serial numbers 3015894821 through 3017342386. MS, model WM25030DMN, serial numbers 3015662325 through 3017342379. MS Recon, model WM25030DMNR, serial number 3015913138 only. Note that the MS Recon range published by CPSC covers a single serial number. The mowers are orange and black with the DR logo printed on the black clippings bag, front guard and top of the motor, and PRO MAX30 labelled on the front handlebars. The model and serial number are printed on the left side of the mower in front of the rear wheel. Sold at independent power equipment stores nationwide and online at drpower.com from September 2024 through September 2025 for between 1,600 and 1,800 dollars. REMEDY: Immediately stop using the recalled mower unless a free repair kit has already been received from DR Power and installed. If the repair kit has not been installed, contact DR Power for updated repair instructions or to schedule a free repair from an authorized dealer. Owners who have not received a repair kit should contact DR Power Equipment to request one. RELATED: DR Power leaf vacuums are covered separately under CPSC 26-166; that is an unrelated defect and an unrelated remedy. Contact: DR Power Equipment 877-221-4038, recall@drpower.com, or drpower.com/recalls.

Affected equipment

  • DR Power PRO MAX30 (PRO MAX)

Sources

Important: TractorNuity makes a best effort to track known defects and concerns via publicly available data. TractorNuity's ownership group however does not have relationships with manufactures to be alerted to defects as they are identified. Regular maintenance and safe operation of any equipment is always the sole responsibility of the operator.

Own one of these machines?

This bulletin has been available to TractorNuity account holders since . TractorNuity users with a matching machine received a notification about it automatically. Create a free account to track your equipment and get notified about issues that affect you.

Create a free account
DR Power PRO MAX30 walk-behind mower blades can run without the blade control engaged (CPSC 26-648) · TractorNuity Service Bulletin TNB02600159